MAE-Toys

Keep your partner quiet with this Leather Ball Gag Harness! Sometimes, when you‘re in the midst of a stimulating session with your partner not being able to hear them can be just as effective as hearing their every word. This leather ball gag harness is an effective way to keep your partner‘s mouth stuffed and reduce the amount of noise they can make. The harness uses comfortable leather straps to stay secure around the head. The ball is then placed inside of the mouth, keeping your partner silent. The harness uses several adjustable straps for a secure fit. Imagine the possibilities when you have your partner bound and unable to speak.

Measurements: Overall length 62 cm adjusts from 40 - 56 cm circumference Ball Gag Ø 41 mm Colors: Black, Pink, Red & Purple

A great way for beginners to enhance their bondage play;inserted into the anus and the open ring connects to the ropes that you‘ll use to tie your partner up

The Hush Silicone lockable ball gag - Red With the hush silicone ball gag you can emphasize during bondage play that silence is golden. The Hush ball gag is designed for both maximum comfort and silence. By utilizing corner straps, one can avoid the typical chafing from standard ball gags. The adjustable strap makes sure it fits snugly around the head, and there's a locking buckle to keep things extra secure (padlock included).  The gag is designed from pthalate-free silicone. Red Silicone ballgag with lockable imitation leather strap adjustable from 17 to 22 inch / 43 to 56 cm.

​Stainless Steel Stimulation catheter made off 304 high quality stainless steel. Stainless Steel Sound "the Stimulater" specifications: diameter: 8 mm length: 95 mm Weight: 42g.

Excellent for sissy and bimbo play, this humiliating accessory will remind your partner that their primary function is oral sex! Stuff their mouth with the rubber gag, either behind their teeth or just behind their lips

Extra Ring for Screw Head CBT mae-sm-112 4 Ring size choices (height x width): Small 29 x 38 mm Medium 35 x 42 mm Large 38 x 52 mm XLarge 42 x 57 mm

immitation leather bondage hood With removable and adjustable eye blinder and mouth part. Laced closure for good fitting.

Black Faux Leather Hood Our sexy Open imitation leather hood will be a great asset to your fetish wardrobe. Made in super sky leather and features a laced closure with hairflap at the rear to hold the hood in place. This hood interfaces perfectly with your BDSM / bondage outfit for a seamless, sexy look. If you have... size: one size

MAE-Toys White Silicone Ball Stretcher Encase your scrotum in a clear, constricting silicone embrace! This stretchy scrotum pouch has a top opening diameter of 2,5cm and a total length of 6cm

Lightweight aluminum buttplug with ergonomic handle, beset with a jewel. This anal plug is available in multiple colours and sizes to fit any preference!

Attractive Butt Plug Jewelry Ø 1.1 inch by MAE-Toys If you pucker up, then pucker up with some of the most unique anal jewelry available. These all plugs are designed for a nice comfortable fit for long term wear. They weigh more than other plugs reminding the wearer of what is inside. The glass cut finish off the plug and attracts lots of attention to the wearing party. These are true works of art. These jeweled butt plugs make a great gift to your loved one and you will love putting them on them! 2.8 inches (7,0 cm) in length 1.1 (2,7 cm) inches at widest point 0.35 inch (0,9 cm) at the smalllest.

Latex Tongue Gag by MAE-Toys This wonderful latex gag is absolutely one of the best gags we have. Your teeth fit in the gag and you can even give a (forced) blow-job!specs: size tongue 58 x 58 mm Color Black (latex belt), Red (latex gag) Adjustable from 41 - 49 cm

Nano V3 Small Cock Chastity Cage - Pink Only for the tiniest of dicks! This Pink ABS chastity cage locks that cock with no chance of escape. Easily applied by sliding the balls through one of the three included backrings, inserting the penis into the small cage and then locked at the top with the convenient cylinder lock. Equipped with 4 rings Diameter 36mm (1.41inch) Diameter 40mm (1.55inch) Diameter 45mm (1.75inch) Diameter 50mm (1.95inch) Cage dimensions: Length inside the tube : 35mm (1.36 inch) Inside diameter of the tube : 34mm (1.3 inch) Number of air holes : 3

small model chastity device clear - Kidding latest small model chastity device mae-sm-009 material: PC safety and environmental protection, light and firm Complete product: one cage + four rings + one secret lock weight: 130g

Black soft penis Chastity Device without lock, penis sleeve and penis root ring design together. Very soft, but strong high quality TPR wich feels very comfortable after wearing. The main body is curved, to prevent an erection of your penis. You can wear it daily because nobody cant see it under your pants and you can keep it on during the day because there's a small hole on the top. For sizes see the picture

The chastity device for the man with a Prince Albert Piercing. Total length: About 65 mm, inner diameter: about 29 mm. The diameter of the internal lock pin is 6 mm. Weight 91g.

Clear, hollow catheter with steel tip and fixing nut. This catheter is intended to be used in conjunction with certain chastity cage models. Simply put this urethral tube through the intended hole and enjoy another layer of submission and humiliation! 

Dildobriefs with vaginal and anal silicone dildos Beautiful artificial leather dildo / chastity slip with 2 silicone and veined penis/dildos to insert. adjustable by 4 straps, 2 straps on each side so that it can be adjusted from small to 2XLarge. Dimensions: large penis Ø 1.2 - 1.4 inch / 30-35 mm, length 5.1 inch / 13 cm small penis Ø 1.2 - 1.4 inch / 30-35 mm, length 3.75 inch / 9.5 cm size: one-size, suitable for a hip size of 30 - 45 inches / 76 - 116 cm

Chromed steel donut ring cock ring, easy to put on and take off with the magnetic panels. The rounded design makes for an especially comfortable wearing experience regardless of the hefty weight of these cockringss. Available in three different sizes. 

Multi Purpose Anal Plug with Cock Ring € 39,95 Product material: Anal hook (stainless steel), anal plug (high quality space aluminum alloy). Package content: Anal hook x 1, anal plug x 3, lifting ring x 1 Weight: 456g

Stainless Steel penisplug Ø8mm Manufactured from medical-grade, nickel-free stainless steel. Cum-Thru Penis Plug ZA004 The total length of the inserted length: 76mm: 60mm: 6mm minimum diameter maximum diameter: 8mm diameter: 4mm weight: 35g

Heavy latex hood with Latex Tongue Gag by MAE-Toys Features a long neck which easily tucks under your shirt or latex suit!Although masculine in style, it can be worn by any gender and is shaped for a snug fit.Can be made more shiny using latex polish/shine. specs: size tongue 58 x 58 mm Color Black (latex hood), Red (latex gag) Available in one size (60 cm head)

Stainless Steel Jewel Penis Head Plug Blue by MAE-Toys A solid metal penis plug with a sparkling Blue jewel mounted on the base is perfect for anyone who wants to add a touch of glamour and elegance to their urethral / sounding play. The plug is made of heavy duty metal, with a layered style shaft. diameter; 0.31 inch / 8mm insertable length: 0.95 inch / 24 mm Total length: 1.97 inch / 50 mm

Unisex Dildo panties with TPE butt plug by MAE-Toys Wetlook spandex short with TPE butt plug inside made from very elastic material, so one size, fits most. The Buttplug is made from high quality TPE so only use water based lubricant. Unisex dildo panties with TPE butt plug specifications: Color: black Material: spandex, TPE Sizes: one size insertable length: 10 cm Max. Ø: 32 mm

Extra spiked ring for chasityt devices: - mae-sm-043 - mae-sm-051s - mae-sm-051l - mae-sm-062-s - mae-sm-062-l - mae-sm-066-50 - mae-sm-074 - mae-sm-074-l - mae-sm-112 - mae-sm-114 - mae-sm-128 - mae-sm-196 - mae-sm-207 - bhs-339 - bhs-340

MAE-Toys Black PU Leather Padded Collar Anatomically shaped imitation leather collar featuring belt closure at the rear and a single D-ring in the front. The collar is comfortable padded. Is suitable for a neck circumference of 32 to 42 cm

Maxi V3 Cock Chastity Cage - Black Only for the biggest of dicks! This black ABS chastity cage locks that cock with no chance of escape. Easily applied by sliding the balls through one of the three included backrings, inserting the penis into the small cage and then locked at the top with the convenient cylinder lock. Equipped with 4 rings Diameter 36mm (1.41inch) Diameter 40mm (1.55inch) Diameter 45mm (1.75inch) Diameter 50mm (1.95inch) Cage dimensions: Length inside the tube : 35mm (1.36 inch) Inside diameter of the tube : 34mm (1.3 inch) Number of air holes : 3

Gebogener hinter Ring zur Verwendung mit einigen Ihrer Lieblings-Keuschheitsgürtel aus Stahl! Ideal, wenn Sie experimentieren möchten, um eine bessere Passform zu finden, oder wenn Ihr Keuschheitsgerät mit mehreren Trägern geteilt wird. Der Lochabstand beträgt bei Ring > 35 mm

Für die Sklaven mit kleinem Schwanz, die von ihrem Vorgesetzten in diesem ultrakurzen Keuschheitskäfig eingesperrt werden. Der mitgelieferte Ring ist in 3 Größen erhältlich (Ø 40, 45 und 50 mm). Genau wie der Keuschheitskäfig besteht dieser Ring aus Edelstahl und ist anatomisch geformt, was zu einem längeren Tragekomfort beiträgt. Optional können Sie das Gefühl eines Penisplugs / Dilators mit dem flexiblen Katheter, Art.-Nr., ergänzen. mae-sm-066-cat (siehe unten) Die Länge des Käfigs beträgt 20 mm Der Innendurchmesser des Käfigs beträgt 32 mm. Cockring wahlweise Ø 40, 45 oder 50 mm Stahldilatator Ø 6 mm, Länge 32 mm Material: Edelstahl

Naomi - 158 cm real Silicone Sex Doll If you are into Asian babes, Naomi should be on your list! Naomi has a beautiful Asian face with seductive brown eyes and luscious lips. Her sultry looks and pouty lips will give you all kind naughty ideas in your head. Her slender hourglass body is perfect. She has squeezable D-cup racks, slim waist, wide hips and a juicy peach bottom.  This voluptuous Asian fantasy doll will not disappoint. Naomi has an articulating metal skeleton that lets her assume all the positions you need to heat up the cold night. She also has all the tools a real woman has to please you - her mouth, anal and vagina is ready to take you to heaven. Her knowing look in her eye is eager for you and she's about to show you! Snuggle up with sexy Naomi today and let her fill your bed. This beautifull 5.2 feet / 158 cm girl will allways be your best girlfriend. She can sit, lay down in all kind of positions, thanks to the Metal skeleton. Her skin colour is brown and you'll receive her exact as in the picture. She can even stand alone on her feet.Dress her up as you like and she'll allways love it! Just come to see her in our shop and be amazed about the quality and the real look. No woman is perfect, but she is!  Specifications:   Material: TPE (Thermoplastic Elastomer)Make: Solid DollFrame: Full frameInternal Structure: Metal SkeletonUsable parts: Vagina, Mouth, AnusHeight : 5'2" / 158cmWeight: 70.5lbs / 32 kg Bra Size: D-cupMeasurements: Bust 33.66" / 85 cm - Waist 23.82" / 60,5 cm- Hips 33.86" / 86 cm Vaginal Depth: 6.7" / 17 cmAnal Depth: 6.7" / 17 cmOral Depth: 5.1" / 13 cm Foot Length: 7.8" / 20 cm

Tsunami Penis Plug € 15,95. Manufactured from medical-grade, nickel-free stainless steel. The total length of 52mm, diameter 8mm, non through hole. The weight of about 25 g

PVC Double Bondage Fist Mitt This Double Fist Mitt keeps two fists, palm-to-palm, bound and immovable in one mitt. It has two Pu-leather wrist belts with two chrome-plated D-rings, and two chrome-plated steel buckles. One size fits all

Unisex Spiked Stainless Steel Heavy Duty Wrist Cuffs   Each slave needs to have their own custom made set of wrist shackles. These Spiked irons will put them in their place. Made from strong, cold, heavy steel allowing long use and wear. Our blacksmith custom makes this item by hand. Locks with a stainless steel allen screw, opens with allen key (supplied).The inside diameter is 6.0 cm, the width is 4.0 cm.The weight of this item is approximately 1155g.

Manufactured from medical-grade, nickel-free stainless steel. A total length of about: 90mm effective length: About 60mm  diameter: 10mm  groove diameter: 5mm  two black silicone ring with a diameter of about 30mm and 25mm  weight: 35 grams.

This innovative device, the so-called Impaler Ballstretcher from the house of Dr. Sado is an effective instrument of punishment for the unruly sub. Six inner thorns ensure painful stimulation of the scrotum. There's a steel cage for to lock up the scrotum., so your sub can't even touch his balles and just have to wait for further commands. Sadists, masochists and friends of CBT will really appreciate the features of this great evil ballstretcher with cage, because the heavy steel not only makes this ring a perfect ballstrecher but also an effective tool for sexual discipline.

PVC Ladies Blindfold with D-Ring This “Worlds Best Blindfold” is constructed of black PVC. and is lined with soft neoprene. This soft neoprene molds too the face and around the nose for exceptional light blocking and protects make-up and long eyelashes thanks to the unique concave design. This blindfold is a joy to wear. The popular cupped eye design prevents any pressure on the eyes. The wearer can blink freely, and in most cases their eyelashes don’t even touch. It is exceptional for long term wear. An adjustment buckle on the back of the head. A stylish chrome eye is attached in the center of this blinfold and is handy for attaching a leash, rope, or any other bondage device. Measurements: The blindfold is 9.5" long and achieves a maximum width of 4.5". The straps are fully-adjustable on either side. The maximum circumference is 28.5" (with a minimum circumference of 23.25". The straps are each 2.75" wide and the back straps are 2" apart.

Silicone Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". KSD-G3 Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". How to put the G3 on. There are three sizes of the KSD-G3. The "A" size is meant for a soft shaft measuring close to 1-1/2" or 38mm across. The "B" size is meant for a soft shaft measuring close to 1-3/8" or 35mm across. The "C" size is meant for a soft shaft measuring close to 1-1/4" or 31mm across. 1. Put the back ring on together with the back piece that has the two alignment posts and the small front piece that goes over the two pins. Now the large ring is complete. 2. Insert the locking pin through the ring and put the spacer on the locking pin. 3. Put some lubricant on the head and shaft. We even suggest using body wash or bar soap and working it into a lather and putting it on. 4. Put the CB-6000 tube on over the head and shaft, getting the head and shaft inside the tube as far as possible. Do not pull the tube onto the alignment pins and locking pin. Keep the tube separate from them for now. 5. Take one of the G3's. While the tube is on the head/shaft, angle the tube more downward while taking the G3 and inserting into the tube by slanting the G3 up and along the inside upper surface of the tube. While you are doing this, you will need to squeeze the two sides of the shaft on the outside of the tube so that you do not get skin pinched between the G3 and the tube. By slanting the tube down and angling the G3 up, you are wanting to keep skin from getting caught between the G3 and the upper inside surface of the tube. 6. Once you think you have the G3 in place, look to see if you can see the whole top side of the G3 and that no skin is trapped between the G3 and the tube. If skin is trapped, pull the G3 out just a bit, continue to angle it up against the inside top of the 6000 tube, and put it back in place. 7. When you have the G3 in place and no skin is trapped between it and the inside upper surface of the tube, you are ready to pull the tube over the alignment pins and the locking pin. 8. As you pull the tube up, make sure that you don't get pinched by the alignment pins, locking pin or G3. 9. Put the lock through the locking pin hole. 10. Flush out all lubricant. Our Cleaning Kit is a great way to stay clean at all times. Use some Q-tips to dry off inside of the tube. We do not suggest leaving soap and/or lubricant on the head/shaft while inside the tube. It is best to stay clean and dry while in chastity. Checking For Problems And Getting A Good Fit As you are deciding which G3 is right for you, make sure you have access to the key just in case you have problems. The way that you would know that the G3 is too tight is that you will have a difficult time urinating and there can be a change in color on your shaft. After a day of wearing the cage and G3, take the cage off and inspect the shaft for any problems. If you are able to urinate freely and there are no problems, you have the correct G3. Along with comfort is security. Are you able to pull out? If you can, you should consider using the next smallest G3. If you are between sizes, you can use some sandpaper and take off some plastic from a smaller G3 to open it up a bit to fit you better. Only take off about 1/32" or 1mm at a time from the front and rear ribs. Modifying the KSD-G3 There is a bit of play where the G3 fits into the tube. If that causes you trouble, you can bend out the sides of the G3 for a tighter fit in the tube. Also, you may want to get a tighter fit on the front tab by bending it down just a bit if you are between sizes. Take a container that can go into the microwave, like a coffee cup. Put about 3 inches of water in it. Put it in the microwave and bring it to a boil. Put the KSD-G3 into the cup and boil for another 30 seconds. Take out the G3 and now you can bend out the two sides and/or you can bend down the front tab for more security. Once you bend out the sides immediately put it back in your tube so that it will harden up to fit the inside of your tube nice and snug. You can modify the G3 as often as you desire. The important thing is that you are both comfortable and secure in your male chastity device.

Luminous Silicone Security for the CB-6000 and 6000S The KSD-G3 is designed to work with the CB-6000, CB-6000 Short and the CB-3000 (with minor modification). The G3 is a totally new design, different from the KSD-G2. It is incredibly easy to put on and take off and comfortable to wear! To make is work with the CB-3000 or Curve you will have to modify it by taking 1/16" off of the top inside of the locking pin hole so that it will drop down 1/16". It will not work with the CB-2000. The G3 incorporates two "ribs" that are designed to keep the shaft in place and not allow for pulling out. The front rib has a slight forward slant to push the shaft forward. The rear rib along with the front rib are designed to push down, thus preventing unwarranted pulling out by the male. All of the surfaces are smooth and edges are rounded for a comfortable fit and long-term wear. There is no more measuring... you will receive all three sizes for one price. The "A" is the largest, meant for a soft shaft width of about 1-1/2". The "B" is for a soft shaft width of 1-3/8", and the "C" is for a soft shaft width of about 1-1/4". KSD-G3 1. Put the back ring on together with the back piece that has the two alignment posts and the small front piece that goes over the two pins. Now the large ring is complete. 2. Insert the locking pin through the ring and put the spacer on the locking pin. 3. Put some lubricant on the head and shaft. We even suggest using body wash or bar soap and working it into a lather and putting it on. 4. Put the CB-6000 tube on over the head and shaft, getting the head and shaft inside the tube as far as possible. Do not pull the tube onto the alignment pins and locking pin. Keep the tube separate from them for now. 5. Take one of the G3's. While the tube is on the head/shaft, angle the tube more downward while taking the G3 and inserting into the tube by slanting the G3 up and along the inside upper surface of the tube. While you are doing this, you will need to squeeze the two sides of the shaft on the outside of the tube so that you do not get skin pinched between the G3 and the tube. By slanting the tube down and angling the G3 up, you are wanting to keep skin from getting caught between the G3 and the upper inside surface of the tube. 6. Once you think you have the G3 in place, look to see if you can see the whole top side of the G3 and that no skin is trapped between the G3 and the tube. If skin is trapped, pull the G3 out just a bit, continue to angle it up against the inside top of the 6000 tube, and put it back in place. 7. When you have the G3 in place and no skin is trapped between it and the inside upper surface of the tube, you are ready to pull the tube over the alignment pins and the locking pin. 8. As you pull the tube up, make sure that you don't get pinched by the alignment pins, locking pin or G3. ]9. Put the lock through the locking pin hole. 10. Flush out all lubricant. Our Cleaning Kit is a great way to stay clean at all times. Use some Q-tips to dry off inside of the tube. We do not suggest leaving soap and/or lubricant on the head/shaft while inside the tube. It is best to stay clean and dry while in chastity. Checking For Problems And Getting A Good Fit As you are deciding which G3 is right for you, make sure you have access to the key just in case you have problems. The way that you would know that the G3 is too tight is that you will have a difficult time urinating and there can be a change in color on your shaft. After a day of wearing the cage and G3, take the cage off and inspect the shaft for any problems. If you are able to urinate freely and there are no problems, you have the correct G3. Along with comfort is security. Are you able to pull out? If you can, you should consider using the next smallest G3. If you are between sizes, you can use some sandpaper and take off some plastic from a smaller G3 to open it up a bit to fit you better. Only take off about 1/32" or 1mm at a time from the front and rear ribs. Modifying the KSD-G3 There is a bit of play where the G3 fits into the tube. If that causes you trouble, you can bend out the sides of the G3 for a tighter fit in the tube. Also, you may want to get a tighter fit on the front tab by bending it down just a bit if you are between sizes. Take a container that can go into the microwave, like a coffee cup. Put about 3 inches of water in it. Put it in the microwave and bring it to a boil. Put the KSD-G3 into the cup and boil for another 30 seconds. Take out the G3 and now you can bend out the two sides and/or you can bend down the front tab for more security. Once you bend out the sides immediately put it back in your tube so that it will harden up to fit the inside of your tube nice and snug. You can modify the G3 as often as you desire. The important thing is that you are both comfortable and secure in your male chastity device.

Short leather bullwhip 30 inch by MAE-Toys Enjoy impact play with the 2.6ft Leather WhipThis whip is designed for quality impact play. The whip is soft and is pre-broken in. The loop is braided and is ideal for maintaining a good grip or hanging for storage. Prepare to show your partner who is in charge. 4ft Leather Whip Specs and Benefits: Size: 2.6 feet in total length, 0.75 inches in diameter at handle, 0.6 inches in diameter at widest point. Material: Leather Color: Black/purple Features fine plaiting Loop is braided and ideal for a good grip or hanging for storage

Bondage - Hodenfessel, Acryl The Humbler Hoden-Fessel, -Quetsche und auch -Strecker, aus massivem Holz, geschliffen und lackiert. Der Humbler wird mit 2 Flügelschrauben schnell zur Venusfalle! Denn: Der Lust-Sklave wird in eine geile Besorg-Es-Mir-Stellung auf die Knie gezwungen; aufstehen unmöglich !!! MEO's Humbler zieht die Hoden gekonnt nach hinten (eigentlich ein sehr geiles Gefühl), macht es jedoch unmöglich aufzustehen. Gut für geile Solos im Liegen geeignet; zieht die Hoden nach hinten und macht "Ihn" noch praller! PS: Stell Dir dochmal vor, Du bist mit dem Humbler gefesselt und hinter Dir steht MEOs kleine Fickmaschine? Hmmmm?!?! Abmessungen: Breite ca. 40 cm, Höhe ca. 3 cm, Öffnung für die Hoden: oval, ca 50 mm breit und 10 mm hoch.  

Urethral Stretching Penis Plug   The glans ring features a movable handle and penis plug and is suitable for everyday use. The tight-fitting ring is placed directly below the glans and the end of the movable handle is inserted along with the stretching plug. The steel glans ring features a penis plug and a special design for secure placement. The plug is used for training and long-lasting urethra expansion. If you wish, it even can be worn over a long period of time. The stretching plug features a hole, allowing the wearer to urinate and ejaculate without needing to remove the glans ring. * length: 42.5 mm* effective length: 39 mm * diameter: 7 mm * ring: 25 mm and 30 mm* weight: 25 gr.

A red pacifier style gag with clear straps to instantly make your ABDL or sissy play a lot more kinky or to add an extra layer of humiliation to your bondage and BDSM sessions. The gag itself has a length of 4cm and is 3cm wide.